全国服务热线: 19524404502

美耐皿餐具移印油墨

发布日期 :2018-05-04 10:10访问:4次发布IP:222.72.98.4编号:4258052
品牌:
欧莱斯
颜色:
黑白红黄蓝绿黑紫桔及荧光色调色
适用材质:
美耐皿餐具、美耐皿厨具、美耐皿材料、美耐皿陶瓷
油墨特性:
油墨使用方便,不需加固化剂,不需烘烤,即可获得优异的附着力。具有平光、附着力佳、耐冲压、耐酒精等特点。1.适用范围:铁、铝、合金、玻璃、陶瓷、电镀、石材、阳极氧化铝表面及烤 (喷)漆面等
分 类
塑料油墨
单 价
230.00元/公斤
最小起订量
1 公斤
供货总量
10000 公斤
发货期限
自买家付款之日起 1 天内发货
有效期至
长期有效
咨询电话
021-59507952
手机
19524404502
Email
zhaogm1986@foxmail.com
在线咨询
点击这里给我发消息
让卖家联系我
详细介绍
具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 
  Oles MPE Plating Ink
  
  MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment 
相关分类
上海凯贤印刷科技有限公司
  • 地址:上海市嘉定区沪宜公路6106号
  • 电话:021-59507952
  • 邮件:492815402@qq.com
  • 手机:19524404502
  • 传真:021-59507635-106
  • 联系人:赵国明
推荐产品
信息搜索
 
免处理油墨产品